Tuesday 6th December 2022 Font size:

White paper proves superior energy efficiency of screw technology for air blowers

Monday, June 28th, 2010

The main conclusion of a technical white paper published by Atlas Copco’s Oil-free Air Division, which explains the differences between screw technology and the traditional ‘Roots’ type lobe technology, is that the introduction of air blowers using internal compression instead of external compression sets a new standard for energy efficiency in the low-pressure market.
The on-average 30 percent more energy efficient screw technology is used in the manufacturer’s recently introduced full range of ZS screw blowers that improve energy efficiency for low-pressure applications and industries such as wastewater treatment and pneumatic conveying.
“Over the past 50 years the blower market for small volume flows has not seen any major technical improvements”, says Chris Lybaert, President of Atlas Copco’s Oil-free Air Division. “The only considerable development we have seen with the ‘Roots’ type lobe blowers, was the reduction of pulsation levels. There were still significant steps to be made in the area of energy efficiency. Atlas Copco achieved this by developing the twin screw design for a low pressure blower. By doing so we introduced a technological advantage in this market segment.”
TÜV certificate emphasises outstanding performance data of ZS screw blower
The range of ZS screw blowers uses the concept of internal compression, while the traditional “Roots” type lobe blowers rely on external compression to obtain an external system pressure. The detailed technical whitepaper demonstrates that, with a thermodynamic approach, internal compression is more efficient than external compression from 0.4 bar(e) / 5.8 psi(g) upwards. Tests, witnessed and certified by the independent Technische Überwachungs-Verein (German Technical Monitoring Association, or TÜV) have proven that the ZS is 23,8 percent more energy-efficient than a tri-lobe blower at 0,5 bar(e)/7 psig, and 39,7 percent at 0.9 bar(e)/13 psig. The technical whitepaper, TÜV certificate and additional information, images and movies can be found on http://www.efficiencyblowers.com/
(Ref 1379)

< go back